|
CHUCK-EEZ
®
Click here to purchase on-line
Applications
CHUCK-EEZ performs in these applications and
more:
 Power
Chucks
Standard Chucks
Fasteners
Press
Fits
Wear-in
Guides and Ways
NOTE: CHUCK-EEZ may be used as an anti-seize lubricant on
fasteners when assembling the chuck.
Benefits
CHUCK-EEZ ® achieves new levels of power chuck
lubrication by offering these benefits:
Double
to triple the clamping pressure of conventional greases
Provides
boundary lubrication protection
Highly
resistant to centrifugal force
Reduces
friction and wear
Reduces
fretting wear
Keeps
work piece clamped in place
Assists
in wear-in of new chucks
Lowers
maintenance cost
Typical
Specifications
| Color |
Moly Gray |
Base oil viscosity:
 SUS @ 100°F
SUS @ 210°F |
580 ± 5
60 ± 2 |
| Dropping Point |
380 ± 10 |
| Flash Point |
450°F minimum |
| Pour Point |
0°F minimum |
| Base Grease |
80 % ±0.5 |
| Lubricating Solids |
25% ±0.2 |
| Penetration, 1/10 mm |
300 ±10 |
Shipping
Limitations
None
Storage/Shelf
Life
When stored under normal warehouse conditions, CHUCK-EEZ
has no known limits on useful life. (An oil layer may form on the top of the
container. Simply stir to mix.)
Packaging
CHUCK-EEZ is available in the following
containers:
4
oz. Cartridges
16
oz. Cartridges
10
lb. Pail
40
lb. Pail
135
lb. Keg
450
lb. Drum
Application
Recommendations
Here are a few application tips to help you get the highest
level of performance from CHUCK-EEZ.
Application methods:
Hand
grease guns
Pneumatic
grease equipment
CHUCK-EEZ
may also be applied down to -20° F using a brush with stiff bristles or by
burnishing in with a clean cloth.
Using
CHUCK-EEZ
Grease each chuck twice for every eight-hour shift, especially if a lot of
coolant is used. Two shots of CHUCK-EEZ is enough since the
guideways cannot hold much grease.
Every two weeks, tear down each chuck to clean and re-grease. (You may wish to
maintain a second backup chuck to keep your machine running while performing
maintenance.)
As cycle times become longer (1.5+ minutes), greasing may only be required once
in every eight-hour shift.
Hydraulic
Pressure
(Based on KITAGAWA F1236H00 Cylinder) Based on 1.250" high soft jaws,
proper pressure is approximately 308 psi. As jaws become taller, pressure should
be reduced to approximately 50% of this value.
NOTE: This is a general guideline and should be checked against the chuck
manufacturer's documentation.
Summary
By using CHUCK-EEZ according to the above recommendations, you
should experience longer chuck life while keeping within the manufacturer's
specifications.
Click here to purchase on-line
| Package
Size |
Pricing |
| 4
oz. Cartridges |
$6.27 |
| 16
oz. Cartridges |
$17.63 |
| 40
lb. Pail |
Call |
| 135
lb. Keg |
Call |
| 450
lb. Drum |
Call |
*Call for special case pricing.
4oz units come in 24 piece case & 16oz units come in 36 piece case.
If you don't see the item you are looking for, please go to our
search page and enter the product description...if we have it
here, you'll find it!
Please be patient with us if you don't see what you need. We are in the process of updating our web site and
adding new parts weekly.
Please check back with us periodically or
email us what you need and we'll
do our level best to take
care of you. | 
Fadal
Distributor & Service Provider Lookup
