 | Help menu with a list of all commands
|
| Directory listing |
| Standard DNC operation |
| DNC with XMODEM protocol |
| Pass through version also available for
compatibility with existing DNC serial networks. |
| Mid tape start with text search option
|
| Baud rate change command |
| Punch of tooling and program data to USB
key |
| Punch of tooling data only |
| Punch of current program only |
| Punch of all programs |
| Punch of machine parameters |
| Punch machine's survey data |
| Includes all required cables and 1GB USB
key |
| Tape input for file loading to CNC memory
|
| View command to verify the proper file has
been selected prior to upload or DNC operation |
USBCNC-FAD-SW:
$600 + Free 2nd day shipping
This is a USB internal interface
for your Fadal CNC88 control that provides an alternative method of
transferring programs to/from PC and the true beauty is drip feeding
with no wires or noise interference problems as with cables.
Operators can instantly choose their CNC file source. (Remote PC or
panel mount USB key) No A/B switch boxes or other physical connections
are required once installed.
Pictured below is the internal
switch box version of the USBCNC controller and is compatible with all
serial DNC software including
Fadal NC, DNC Software, Predator, MasterCam, SurfCAM, Virtual Gibbs,
and FeatureCAM.
USBCNC controller with integral DNC firmware. Includes serial port pass
through for connection to existing serial networks.
The USBCNC-FAD disk reader control acts as
an interface between commercially available USB flash memory and any
Fadal CNC 88. The addition of a Calmotion USBCNC controller allows users
to load and punch programs to any commercially available USB memory
device. The USBCNC-FAD-SW also contains integrated DNC functionality for
drip feed operation of large files. The proximity of the USBCNC-FAD-SW
to the control ensures the highest baud rate communication possible with
a Fadal CNC.
The USBCNC-FAD-SW allows users to
maintain their exiting serial networks by operating in pass through
mode. Normal serial interface is maintained. In USB mode, the operator
can load, punch and DNC files from any USB memory device.
Features include:
| Help menu with a list of all commands
|
| Allows normal connection to a remote RS-232
host PC. |
| View list of files on USB key from a remote
PC |
| Directory listing |
| DNC operation |
| Mid tape start with text search option
|
| Baud rate change command |
| Punch of tooling and program data to USB
key |
| Punch of tooling data only |
| Punch of current program only |
| Punch of all programs |
| Punch of machine parameters |
| Punch machine's survey data |
| View USB file directory from a remote PC
|
| Tape input for file loading to CNC memory |
| View command to verify the proper file has
been selected prior to upload or DNC operation |
Fadal
Distributor & Service Provider Lookup
