|
Call Us : 208-855-9426
Email : Sales@FadalCNC.com
We are working hard to keep
you up and running.
|
FadalCNC-DNC.com
| Troubleshooting Tips |
| |
| We have tested this product very thoroughly, however the
planet is not perfect yet, so until then we have some tips to keep
your up and running. |
| |
1. CNC stops taking blocks of code from
your PC. Overflow alarms.
a. Double check your cabling to be sure you are
working in a null-modem configuration. Communication
parameters must be set at 7,E,1 at whatever Baud rate you have
matched with your PC and Xon/Xoff is enabled and turned on.
This is software flow control and it does need to be turned on.
b. Make sure your screensaver is turned off.
c.
Make sure your power settings are such that your hard drive does
not shut off and your PC does not hibernate.
d. If all else fails, try this. From the file
menu select "Operate" then when the dropdown window opens,
select "Select & Write File from Disk."
This will open a box to find the file you want to send to
your PC and actually run it from your hard drive rather than
from RAM memory. In cases where you are lean on memory,
this option allows you to bypass starving memory issues and keep
the flow to your machine seamless.
|
|
