Lubrication Products
CHUCK-EEZ ®
Click here to purchase on-line
Applications
CHUCK-EEZ performs in these applications and more:
Power Chucks
Standard Chucks
Fasteners
Press Fits
Wear-in
Guides and Ways
NOTE: CHUCK-EEZ may be used as an anti-seize lubricant on fasteners when assembling the chuck.
Benefits
CHUCK-EEZ ® achieves new levels of power chuck lubrication by offering these benefits:
Double to triple the clamping pressure of conventional greases
Provides boundary lubrication protection
Highly resistant to centrifugal force
Reduces friction and wear
Reduces fretting wear
Keeps work piece clamped in place
Assists in wear-in of new chucks
Lowers maintenance cost
Typical Specifications
| Color |
Moly Gray |
Base oil viscosity:
 SUS @ 100°F
SUS @ 210°F |
580 ± 5
60 ± 2 |
| Dropping Point |
380 ± 10 |
| Flash Point |
450°F minimum |
| Pour Point |
0°F minimum |
| Base Grease |
80 % ±0.5 |
| Lubricating Solids |
25% ±0.2 |
| Penetration, 1/10 mm |
300 ±10 |
Shipping Limitations
None
Storage/Shelf Life
When stored under normal warehouse conditions, CHUCK-EEZ has no known limits on useful life. (An oil layer may form on the top of the container. Simply stir to mix.)
Packaging
CHUCK-EEZ is available in the following containers:
4 oz. Cartridges
16 oz. Cartridges
10 lb. Pail
40 lb. Pail
135 lb. Keg
450 lb. Drum
Application Recommendations
Here are a few application tips to help you get the highest level of performance from CHUCK-EEZ.
Application methods:
Hand grease guns
Pneumatic grease equipment
CHUCK-EEZ may also be applied down to -20° F using a brush with stiff bristles or by burnishing in with a clean cloth.
Using CHUCK-EEZ
Grease each chuck twice for every eight-hour shift, especially if a lot of coolant is used. Two shots of CHUCK-EEZ is enough since the guideways cannot hold much grease.
Every two weeks, tear down each chuck to clean and re-grease. (You may wish to maintain a second backup chuck to keep your machine running while performing maintenance.)
As cycle times become longer (1.5+ minutes), greasing may only be required once in every eight-hour shift.
Hydraulic Pressure
(Based on KITAGAWA F1236H00 Cylinder) Based on 1.250" high soft jaws, proper pressure is approximately 308 psi. As jaws become taller, pressure should be reduced to approximately 50% of this value.
NOTE: This is a general guideline and should be checked against the chuck manufacturer's documentation.
Summary
By using CHUCK-EEZ according to the above recommendations, you should experience longer chuck life while keeping within the manufacturer's specifications.
Click here to purchase on-line
| Package Size |
Pricing |
| 4 oz. Cartridges |
$6.27 |
| 16 oz. Cartridges |
$17.63 |
| 40 lb. Pail |
Call |
| 135 lb. Keg |
Call |
| 450 lb. Drum |
Call |
*Call for special case pricing. 4oz units come in 24 piece case & 16oz units come in 36 piece case.
If you don't see the item you are looking for, please go to our search page and enter the product description...if we have it here, you'll find it!
Please be patient with us if you don't see what you need. We are in the process of updating our web site and adding new parts weekly.
Please check back with us periodically or email us what you need and we'll do our level best to take care of you.
